How Do I Dangle Curtain Rods?

Posted by April 11, 2023

광고 To hold most curtain rods you’ll need a pencil, measuring tape, hammer, drill, screwdriver and a degree. Having an additional pair of palms is de facto useful too. You’ll be able to observe the directions the come along with your curtain rod or simply observe these basic pointers.

Bear in mind the way you measured to purchase the rods? You determined how far out from either side of the window you need your curtains to hold. For many home windows you may need the curtain to begin about 1½ inches above the window trim.

Now have a look at your curtain rod. For normal hidden rods measure out from the window 3-5″ (no matter you selected) and up from the highest 1½”. Mark this spot on either side of the window and ensure it is degree, even, straight – no matter you name it, it is vital! Now simply observe the directions that got here along with your curtain rod for hanging that exact kind of {hardware}.

For uncovered curtain rods, like in the present day’s standard ornamental curtain rods, you may need to decide the place to hold the brackets. Comply with the above instructions for a hidden rod, besides you may be marking the spot the bracket hangs – which can a unique distance from the window 서초커튼.

Here is some actually useful info: discover out the place the “cripple studs” are situated. They’re wooden studs proper round your window. Learn how far out out of your window they prolong and you will have an easy-breezy time hanging your rod – you will not want anchors or cussing or a number of beer later.

How do you do that? You’ve got gotta have a stud finder. It is an electronic gadget you will get at a ironmongery shop for $10-50. You actually solely want a cheap one for those who’re simply hanging curtain rods and the occasional wall hanging. Comply with the directions to seek out your studs after which mark your spots.

When you’re not going to fiddle with a stud finder, you’ll want to connect your rods very near the window trim – you may greater than seemingly discover a stud there.

(It is also helpful to know concerning the window’s header. It is a stable chunk of wooden proper above the window that spans the size of the window. It normally would not prolong a lot previous the window so you will not be screwing into it for many rods, however you by no means know when this type of information turns out to be useful!)

No matter you do, do not waste your time through the use of screws too short to do the job. You have to get that screw by way of the drywall and into the wooden so it would not loosen later and fall out!

When you’re hanging a rod contained in the window trim you do not have to seek out any studs – you may be screwing proper into stable wooden. You will even be utilizing particular {hardware} referred to as inside mounting brackets.

What occurs if you cannot discover any studs or any stable wooden to screw into? You’ve got nonetheless acquired choices, and they’re going to work nicely for you. Go to your ironmongery shop and ask for toggles or anchors. The EZ toggles and anchors work nice, and guess what? They arrive with directions and . . . they’re EZ!

Closed